Slash Your Costs Instead of Your Hoses

With its patented design, HoseRunner™ uniquely solves numerous costly problems facing underground cleaning operations.

For more information or to request a brochure contact Starky.

"As a Jet and CCTV operator of 15 years experience, since I started using the Hose Runner it has become an essential tool for me in drain cleaning and inspection. It is much better at hose protection than the sock type tubes I previously used. It makes my job easier and the hose last much longer. "I will quite often use 2 hose runners at once, particulary when the work vehicle is several metres away from the maintenance hole (MH) or pit, or where there are sharp angles as the jet hose goes over the edge of the MH and into the pipe being cleaned. The rollers in the hose runner reduce the friction on corners and tight bends tremendously. It is now just as easy to retrieve hose from long distances as if you were working directly over the MH. "I have found it does not slip out of the pipe like the old socks when retrieving hose, and when positioned correctly it will perform perfectly every time. "I also use the hose runner for protecting the coaxial cable of the CCTV system I utilize in the same jet truck.

"It's definitely a worthwhile investment to protect high pressure drain cleaning hose and I would recommend it to every hydrojet operator. "You’ve done well with its design, it’s simple to set up and remove in seconds, and easy to position." Shane Ingas, Jetcam.

Slash hose replacement costs With a HoseRunner, sharp corners are instantly transformed into smooth, low-resistance curves that hoses absolutely love. Eliminates all that abrasion caused by sharp corners. Selfcleaning machined rollers provide a low-resistance path for all hose sizes.

Reduce hose repair costs Low friction, low tension reduces abrasion and hose stretching that cause premature hose failure, in turn reducing the need for expensive and time-wasting repairs.

Long lasting, simple to use Computer designed, fully welded construction with corrosion-resistant zinc plating, the HoseRunner is built to take the punishment that your hoses would otherwise suffer. Specially machined self-cleaning UHMWP (ultra-high molecular weight polyethylene) rollers ensure low wear and maximum life.

Increase efficiency, increase productivity Lowered friction means lower power requirements, even at depth with the hose filled with water. Reduced surveillance time and costs, even with multiple direction changes, mean that the job is carried out with less fuss. Easier recovery from jamming means that the job is completed in the shortest possible time and at the least cost.

Self-Aligning Its patented design means that HoseRunner automatically aligns itself on any corner around which the hose has to pass. Even acute angles are handled with ease. The higher the strain on the hose the more effective HoseRunner(TM) becomes.

Reduced jamming When a jam threatens, HoseRunner enables all the additional pull to be applied to clearing the jam instead of increasing corner friction.

Fitted instantly, no tools required HoseRunner is incredibly simple to fit. Its spring loaded retainer mechanism allows HoseRunner to be easily clipped onto any hose, even one that's already deployed and in situ. No tools are required.

Improved cleaning Pulling on the hose often results in cleaning jets being misaligned. Using a HoseRunner results in all debris being removed, even in those first 5 or 10 metres of pipe that are often missed.

A model for every application HoseRunner comes in a choice of sizes and is perfect for everything from small diameter camera data cables to heavy duty hoses with cleaning nozzles.

Constructions Rollers: 54mm diameter Machined UHMWPE (Ultra high molecular weight polyethylene). Self-cleaning with lubrication hole. Body: Profile cut fabricated welded steel, zinc plated. Suitable for hoses and cables from 5mm diameter to 37mm diameter.