PitLift™- Save your backs and your equipment with the flip of a switch!

"As a Jet and CCTV operator of 15 years experience, since I started using the Hose Runner it has become an essential tool for me in drain cleaning and inspection. It is much better at hose protection than the sock type tubes I previously used. It makes my job easier and the hose last much longer..."
Read more

PitLift™

Save your backs and your equipment with the flip of a switch!

Control for CCTV Cameras placement in and out of pits

With the ease of assembly using only two lynch pins, the PitLift™ is assembled in minutes, to allow precision control in the placement and retrieval of CCTV Cameras and other equipment in and out of pits.

Minimise workcover issues
Only minutes to set up
WLL. 250kg
Totally independent operation with 1600 peak amps power pack
350kg Warn Industrial Hoist
Ideal for when your work vehicle can't get close

For more information or to request a brochure contact Starky.

Reduce Your Workcover Claims
Your staff will love the ease at which they can lift or lower equipment at just the flick of a switch.

Minutes to Setup
One person can set up the PitLift ready to go in minutes. Two lynch pins secure the gantry while the hoist is attached using snap hooks. Power leads are fitted with Anderson plugs for quick attachment to the recommended power pack or your work vehicle.

Independent Operation
Complete independence from your vehicle is possible with the use of the 1600 peak amps,
12v power pack. (3200 pa also available) Ideal for when vehicle access to pits is not possible.

Capacity
The gantry is tested and rated for a 250kg. WLL. The industrial quality Warn® hoist is 350kg.WLL Standard cable fitted is 15m of 4mm. A longer cable with reduced capacity is available on request.

Storage
Gantry collapses down to three pieces for convenient onboard storage.

Specifications
Gantry: Fabricated mild steel, zinc plated.
2 x 4 wheel track rollers, park-brake on one.
Hanging eyelets for power cable.
Hoist: Warn® 350 DC. 12v.